Description The MIX-4010-DUCT is a feature-rich and addressable photoelectric smoke duct detector designed to detect smoke in the air duct system. It comes equipped with an intelligent smoke detector head (MIX-4010-D) that continuously checks air obscuration and reports it to the FACU by using the MGC MP Protocol. The air velocity rating ranges from 300ft/min to 4,000 ft/ min, which allows it to be used in a variety of settings. The MIX-4010-DUCT can also adjust to multiple mounting configurations using a flexible mounting bracket (ordered separately) making it simple and easy to install. It also comes with a test port that provides functional smoking testing access with cover in place. To aid visual inspection, the MIX-4010-DUCT has a clear and transparent cover that allows visibility of different LED colors on the Smoke detector to identify alarms and troubles. It uses a one-pipe sampling tube which provides sampling and exhaust in the same tube; no need to cut multiple holes in the duct. Its sampling tubes have been designed to use dual outflows at optimal points of separation to detect smoke at very low duct air velocities, this is called Venturi effect. The device accommodates multiple sampling tube lengths, making it suitable for all duct widths. The duct smoke detector housing is designed to optimize air flow, ensuring accurate detection. When cleaning is required, the assembly comes apart easily and snaps back together in seconds.
Features
- Smoke Detector head included.
- Air velocity rating from 300ft/min to 4,000 ft/min
- Clear cover allowing visual inspection.
- The Duct Smoke Detector housing is designed to optimize the air flow on the smoke detector.
- Venturi effect on sampling tubes allows smoke detection at very low duct air velocities.
- The unique installer friendly one-pipe design ensures correct operation for air sampling inflow and outflow.
- Multiple sampling tube options that fit on a wide range of duct widths
- Adjusts to multiple mounting configurations using a flexible mounting bracket.
- Simple and Easy installation
- Compatible with 4000N and 400 Series FACUs
- Sensor is easily addressed through the hand-held device programmer (MIX-4090)
- Relay contact option through the FACU
- Multi-function status LED indicators for Alarm and Trouble conditions.
- Remote LED indicator function
- Advanced customizable remote test function.
- Test port provides functional smoke testing access with cover in place. Remote Test Function: Once the MIX-4010-DUCT is connected to a FACU, a correlation to a switch is configured for the duct smoke detector to be tested. This switch can be a remote or local input to the panel. The switch action must be correlated to the self-test operation of that specific MIX-4010-DUCT. When the correlated switch is activated, the MIX-4010-DUCT is commanded through the panel to enter its self-test mode. This self-test mode allows the user to set the detector into alarm remotely during the period the switch is activated, the detector LED and its remote LED will be activated. In this way, the tester can confirm that the MIX-4010-DUCT is fully functional. Warning: This detector is not intended as a substitute for open area protection. MIX-4010-DUCT is for use only with model MIX-4010-D detector head.